Hypersonic hair dryer

Leave your message and you’ll get:

24*7 online service support Articles in the hair dryer industry Sometimes maybe Discount

I'm not a robot

News

Home >  News > 

BLDC hair dryer distributors.Usage and maintenance of hair dryer

Time:2023-10-24 Views:1

  169788011319aafd

  In order to ensure the effective use of hair dryers for drying and shaping, achieve correct, reasonable and safe use, and extend the lifespan of the appliance, the following precautions should be taken when blowing:

  (1) The hair dryer must be used at the power voltage specified on the nameplate. A hair dryer with a three wire power cord should be correctly grounded.

  (2) When using a hair dryer, the air inlet and outlet must be unobstructed, otherwise not only will the use effect not be achieved, but it will also cause overheating and damage to the appliance.

  (3) When used for blowing dry and wet hair, the air outlet of the hair dryer should be kept at a certain distance (not less than 50mm) from the hair to prevent blockage of the air outlet and burning of the hair. At the same time, avoid the water vapor generated during hair drying from affecting the insulation strength and causing electrical leakage,

  So maintaining a certain distance is important for safety.

  (4) Before using the hair dryer, try to switch it from the "hot" position to the "cold" position as much as possible, in order to cut off the power supply of the electric heating element first. Let the remaining heat of the electric heating element be blown out with the help of cold air, so that the interior of the hair dryer

  Lower the temperature and then cut off all power. This can slow down the internal insulation aging of the hair dryer and extend its service life. When placed on the table at the same time, it is not easy to burn other objects.

  (5) Electric hair dryers should not be used continuously for too long and should be used intermittently to avoid overheating and burning out of the heating elements and motor. When the hair dryer is not in use, it should be placed in a dry place and should not be placed in the open or humid environment,

  When taken out after long-term use, the insulation resistance should be checked first, and it can be used normally if it meets the requirements to ensure personal safety during use. Due to the presence of dust in the air, although many hair dryers are equipped with filters at the air inlet

  The net plays a protective role, but it cannot prevent very small particles of dust, and not all hair dryers have filter mesh. For this reason, it is necessary to regularly clean the dust to prevent blockage of the air duct and damage to the components.

  (6) Do not throw the hair dryer casually, as the heating element and motor may be damaged by mechanical impact. At the same time, do not disassemble it easily to avoid damaging the components. To ensure the normal use of the hair dryer, the bearings of the motor should be regularly checked

  Add lubricating oil to some and other rotating parts, but the amount of oil should not be too much to avoid flowing to the coil and causing malfunction.

Read recommendations:

B2B haircare equipment sales

BLDC motor hair dryer Manufacturing

Compact hair dryer distributors

Professional hair dryer supplier

The Scientific Beauty of Plasma Hair Dryers.Foldable hair dryer Factory

Previous:PREVIOUS:BLDC hair dryer Processing.Electric hair dryer with long lifespan filter

Next:Next:BLDC motor hair dryer Manufacturing.The benefits of hair dryers