Hypersonic hair dryer

Leave your message and you’ll get:

24*7 online service support Articles in the hair dryer industry Sometimes maybe Discount

I'm not a robot

News

Home >  News > 

BLDC motor hair dryer equipment.Usage of hair dryer

Time:2023-10-28 Views:1

  图片

  1. According to usage, there are handheld and wall mounted hair dryers. The wall mounted hair dryer can be placed on a table or hung on a wall for use, and you can blow it yourself.

  2. According to the air supply method, there are centrifugal hair dryers and axial flow hair dryers. The centrifugal type relies on an electric motor to drive the fan blades to rotate, allowing the air entering the hair dryer to obtain inertial centrifugal force and continuously exhaust outward. Its disadvantage is that not all the exhaust air flows through the motor, resulting in a higher temperature rise of the motor; The advantage is low noise. An axial flow motor drives the fan blades to rotate, pushing the air entering the hair dryer to flow axially and continuously exhaust air outward. Its advantage is that all the discharged air flows through the motor, which has good cooling conditions and insulation that is not prone to aging; Its disadvantage is that it is noisy.

  3. Classified by the material used for the shell, there are metal hair dryers and plastic hair dryers

  Type hair dryer. The metal hair dryer is sturdy and durable, and can withstand high temperatures. Plastic hair dryers are lightweight and have good insulation performance, but they are prone to aging and have poor high-temperature resistance.

  Because when using a hair dryer, the radiation source - the rear end motor of the hair dryer is very close to the head, which can easily cause dizziness and fatigue due to electromagnetic radiation. Therefore, when using a hair dryer, the correct method should be maintained, such as turning on and off the hair dryer as far away from the head as possible; When using, it is best to keep the hair dryer perpendicular to the head; Do not use it continuously for a long time, it is best to stop intermittently.

  1. After washing your hair, use a dry towel to wipe off any excess moisture, then divide the hair and secure the outer hair on top of your head with clips. Because doing so can better blow dry hair.

  2. Divide the lower part of the hair into two sides, extend 5 fingers and insert them into the hair. Use your fingers to comb from head to tail while drying with a hair dryer.

  3. Remove the hair above the head and divide it into two parts to dry. Use both hands to insert it into the hair as shown in the picture and comb it, then use a hair dryer to dry it.

  4. Divide the hair on the side into two parts, with the ear as the boundary. Use a roller comb to slowly comb from the root to the tip of the hair, and place the hair dryer on the side for air supply.

  5. The hair behind the ears is also treated in the same way, pay attention to the hair dryer blowing in the opposite direction from the back.

Read recommendations:

Hotel hair dryer wholesale

Hypersonic hair dryer custom

Ionic hair dryer maker

Fast hair dryer wholesaler.Innovative technology for hair dryers: How can developers meet user needs?

Technological innovation of high-speed hair dryers.Hair dryer for fine hair

Previous:PREVIOUS:BLDC hair dryer manufacture.Classification of folding hair dryers

Next:Next:BLDC hair dryer manufacturer.Main components of hair dryer