Leave your message and you’ll get：
● 24*7 online service support ● Articles in the hair dryer industry ● Sometimes maybe Discount
● 24*7 online service support ● Articles in the hair dryer industry ● Sometimes maybe Discount
Time：2023-10-25 Views：1
In order to ensure the effective use of the drying and shaping function of the hair dryer, achieve correct, reasonable and safe use, and extend the lifespan of the appliance, the following precautions should be taken when blowing:
(1) The hair dryer must be used at the power voltage specified on the nameplate. A hair dryer with a three wire power cord should be correctly grounded.
(2) When using a hair dryer, the air inlet and outlet must be unobstructed, otherwise not only will the use effect not be achieved, but it will also cause overheating and damage to the appliance.
(3) When used for blowing dry and wet hair, the air outlet of the hair dryer should be kept at a certain distance (not less than 50mm) from the hair to prevent blockage of the air outlet and burning of the hair. At the same time, it is important to maintain a certain distance for safety to avoid the water vapor generated during hair drying from affecting the insulation strength and causing leakage.
(4) Before using the hair dryer, try to switch the hair dryer from the "hot" position to the "cold" position as much as possible, in order to cut off the power supply of the electric heating element first. Let the remaining heat of the electric heating element be blown out with the help of cold air to reduce the internal temperature of the hair dryer, and then cut off all power supply. This can slow down the internal insulation aging of the hair dryer and extend its service life. When placed on the table at the same time, it is not easy to burn other objects.
(5) The hair dryer should not be used continuously for too long and should be used intermittently to avoid overheating and burning of the heating element and motor. When the hair dryer is not in use, it should be placed in a dry place and should not be placed in the open or humid environment. When it is taken out after long-term use, the insulation resistance should be checked first. It can be used normally if it meets the requirements to ensure personal safety during use. Due to the presence of dust in the air, although many hair dryers are equipped with filter screens at the air inlet for protection, they cannot prevent very small particles of dust, and not all hair dryers have filter cloth. For this reason, it is necessary to regularly clean the dust to prevent blockage of the air duct and damage to the components.
(6) Do not throw the hair dryer casually, as the electric heating element and motor may be damaged by mechanical impact. At the same time, do not disassemble it easily to avoid damaging the components. In order to ensure the normal use of the hair dryer, lubricating oil should be regularly added to the bearings and other rotating parts of the motor, but the amount of oil should not be too much to avoid flowing to the coil and causing malfunction.
Read recommendations:
BLDC motor hair dryer supplier
