High-speed hair dryer Factory.Usage of folding air outlet fan

　　type

　　1. According to usage, there are handheld and wall mounted hair dryers. The wall mounted hair dryer can be placed on a table or hung on a wall for use, and you can blow it yourself.

　　2. According to the air supply method, there are centrifugal hair dryers and axial flow hair dryers. The centrifugal type relies on an electric motor to drive the blades to rotate, allowing the air entering the hair dryer to gain inertial centrifugal force and continuously exhaust air outward. Its disadvantage is that not all the discharged air flows through the motor, resulting in a higher temperature rise of the motor; The advantage is low noise. The axial flow motor drives the fan blades to rotate, pushing the air entering the hair dryer to flow axially and continuously exhaust air outward. Its advantage is that all the discharged air flows through the motor, which has good cooling conditions and less prone to insulation aging; Its disadvantage is that it is noisy.

　　3. According to the material used for the shell, there are metal type hair dryers and plastic hair dryers

　　Type hair dryer. Metal hair dryers are sturdy and durable, and can withstand high temperatures. Plastic hair dryers are lightweight and have good insulation performance, but they are prone to aging and have poor high-temperature resistance.

　　Because when using a hair dryer, the radiation source - the motor at the back of the hair dryer is very close to the head, it is easy to cause dizziness and fatigue due to electromagnetic radiation. Therefore, when using a hair dryer, the correct method should be maintained, such as turning on and off the hair dryer as far away from the head as possible; When using, it is best to keep the hair dryer perpendicular to the head; Do not use continuously for a long time, it is best to stop intermittently.

　　1. After washing your hair, use a dry towel to wipe off any excess moisture, then divide the hair and secure the outer hair to the top of your head with clips. Because doing so can better blow dry hair.

　　2. Divide the lower part of the hair into two sides, extend 5 fingers and insert them into the hair. Use your fingers to comb from head to tail while drying with a hair dryer.

　　3. Remove the hair above the head and divide it into two parts to dry. Use both hands to insert it into the hair as shown in the picture and comb it. Use a hair dryer to dry it.

　　4. Divide the hair on the side into two parts with the ear as the boundary, use a roller comb to slowly comb from the root to the tip, and place the hair dryer on the side to blow air.

　　5. The hair behind the ear is also treated in the same way, pay attention to the hair dryer blowing air in the opposite direction from the back.

Read recommendations:

Hospitality hair dryer Processing

Quiet hair dryer distributors

BLDC motor hair dryer Solution

Salon-grade hair dryer wholesale

Hair dryer stand wholesale.Hair dryer technology innovation: a creative journey for developers